Sharp 10P03-CH-NG Blu-ray Player User Manual


 
Yes, No
Auto Power Off
This sets the Player so that power is automatically shut
off if playback is stopped for about 10 minutes.
Yes, No
NOTE
When “Quick Start” is set to “Yes”, the Player requires
some time to turn off.
Front Display/LED
If you feel that the indicators on the player’s front
display are too bright when watching movies, you can
turn them off except for the POWER indicator.
On, Off
Item
Control Panel
This lets you set display of the control panel on the TV
screen to on or off.
Yes, No
Item
AQUOS LINK
This lets you set the Player to receive the control signal
from the AQUOS LINK remote control via the HDMI
cable.
Yes, No
NOTE
For details, refer to the operation manual of TV.
If “Component” is selected from the “Video Out Select”
menu, AQUOS LINK is not available. Select “HDMI” if you
want to use AQUOS LINK features.
Angle Mark Display
This lets you turn the Angle Mark Display on or off
when BD/DVD video recorded with multiple angles is
played back. (The Angle Mark is displayed in the lower
right screen.)
Yes, No
Disc Language (Disc Priority Language)
This lets you select the language for subtitles, audio
and menus displayed on the screen.
Refer to the Language List. (Page 62)
Refer to the Language List. (Page 62)
Refer to the Language List and Language Code List.
(Page 62)
SETTINGS
Playback Setting
Parental Control
This lets you set the Parental Control depending on the
disc content. The available Parental Control Levels are
shown below.
The 4-digit password number needs to be entered
before the Parental Control Levels and the Country
Code are set. The Parental Control Levels and the
Country Code cannot be set if a password has not
been created or the password is not entered.
8 and Off: All DVD-video can be played.
1–7: Prohibits play of DVD-video with corresponding
ratings recorded on them.
No Limit: All BD-video can be played.
0–99 year(s): Prohibits play of BD-video with corresponding
ratings recorded on them.
Sets the country code. Refer to the Country Code List
(page 62) because the ratings differ according to the
country.
NOTE
Refer to “Basic Operation for Playback Setting” on page 48
for details.
Smart Settings
Quick Start
This turns the Quick Start function on and off.
When the Quick Start function is on:
The startup time of the Player is reduced.
However, power consumption will increase.
When the Quick Start function is off:
The player will enter the low power consumption mode
when in standby condition.
(Continued on the next page)
51
Settings
Item
Item
Item
Item (Subtitle)
Item (Audio)
Item (Menu)
Item
Item (Country code)
Item (For DVD-VIDEO)
Item (For BD-ROM)