Filter
Top Products
39
Dimension: 140mm x 215mm
Using the Video and Audio Input Jacks (Continued)
P
R
P
B
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDEO
R
L
COMPONENT
Video Equipment
To COMPONENT
VIDEO OUTPUT
Jacks
To AUDIO
OUTPUT
(L/R)
Video Equipment with
Component Video
(Component Color)
Output Jacks (Y, P
B
and P
R
)
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
To VIDEO OUTPUT
(Rear connection terminals of TV)
L To watch video material playback.
• Press the Remote’s
INPUT
button to select the VIDEO INPUT mode for the video equipment you wish
to play.
• The external VIDEO INPUT mode will change as follows each time the
INPUT
button is pressed.
• When the AV cables are being connected to the VIDEO INPUT 1 and COMPONENT Y terminals
simultaneously, the COMPONENT terminal has priority over the VIDEO terminal.
• INPUT mode can be selected by pressing either the
CH UP (
8
)
on the TV remote control when the TV
is set to the highest channel stored in memory, or by pressing the
CH DOWN (
9
)
when it is set to the
lowest channel.
Note:
• When connecting video or audio equipment to the television, be sure that the power is turned off in
order to prevent damage to either the television or the equipment being connected.
• It is the intent of SHARP that this product be used in full compliance with the copyright law of the
United States and that prior permission be obtained from copyright owners whenever necessary.
• For detailed information on the connection and use of auxiliary equipment, refer to the instruction
manuals of the equipment being used.
• The connection cords can be obtained from your local video store.
AIR
or
CABLE
INPUT 1 (or COMPONENT)
(IN 1)
Rear
INPUT 2
(IN 2)
Front
20F650[34-39].p65 9/12/04, 1:43 PM39