Filter
Top Products
43
Dimension: 140mm x 215mm
Operation of Universal Remote Control (Continued)
321
654
987
100
0
TV • CATV • VCR • DVD
ABCD
PERSONAL PREFERENCE
9
VCR-CH
8
FLASHBACK
POWER (DVD/VCR)
REC
PLAY
:
L
STOP
FWD
)
REW
(
PAUSE
J
POWER
DISPLAY INPUT
ENTER
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
CATV TV
DVD VCR
• How to identify a DVD
The remote control may already be set to
operate your DVD. Try this initial check before
going on to the following “identify” section.
(1)Press
CATV/DVD
button.
(2)Point remote towards DVD and press
POWER
(DVD/VCR)
.
(3)Does the remote turn the DVD ON and OFF?
• If yes, the remote is ready to operate the DVD
and no further steps are needed.
• If no, continue to the “identify” section.
Setting Method
Refer to the following steps and list to quickly
find the remote control code for your accessory
DVD.
• First look up your DVD’s remote control code
number before going through the Setting
Method.
(1)Press
CATV/DVD
button.
(2)Press and hold down
INPUT
and
CH DOWN
(
9
)
on your remote control.
Then release both buttons.
(3)Within ten seconds after releasing
INPUT
and
CH DOWN (
9
)
, enter your DVDs two-digit
remote control code number using
REMOTE
KEYPAD
(refer to list).
• The remote control is now ready to send
commands to your DVD.
DVD BRAND
REMOTE CONTROL
CODE NUMBER
Denon 02
JVC 09
Magnavox 04
Marantz 04
Mitsubishi 06
Panasonic 02
Philips 04
Pioneer 08
Proscan 03
RCA 03
Samsung 07
Sharp 01, 10
Sony 05
Toshiba 04
Yamaha 02
Zenith 04
Note:
Depending on the model, year produced, brand,
and type of DVD, some models may not be
compatible with the remote control.
TV POWER
REMOTE
KEYPAD
POWER
(DVD/VCR)
CATV/DVD-TV/VCR
DISPLAY
CHANNEL UP (,)/
DOWN(9)
INPUT
20F650[40-43].p65 9/12/04, 1:44 PM43