Filter
Top Products
45
Dimension: 140mm x 215mm
Before Calling for Service
Check these items and see if you can correct the trouble with a slight adjustment of the controls.
POSSIBLE REMEDY
Try a new channel, if OK, then
XXX X XXXXXXX
there is possible station trouble.
Is TV plugged in? Power at outlet? XX X
Is TV’s POWER button on? XX
Is antenna connected to terminal
XXX X X X
on the back of the set?
If outside antenna is being used,
XXXX X XXXXX X
check for broken wire.
Check for local interference or
XXXXXXX X
external electrical noise.
Turn off with POWER button and
XX
then turn it on after about a minute.
Adjust COLOR control. X
Adjust PICTURE control. XX
Check external Video/Audio
X X XXX
products: look for loose/broken
connection leads.
(Refer to page 38 ~ 39)
Check batteries of Remote Control. X
Press TV/VCR button on the
X
remote to select TV mode.
Are audio cables connected firmly?
X
Check the volume level.
Is SPEAKER ON? See page 15 ~ 16. X
Change CLOSED CAPTION mode
to “OFF” / ENERGY SAVE mode to X
“OFF”.
Unplug the TV and plug it in again
X XXXX XXXXX X
after two minutes or longer.
PROBLEM
No Playback of VCR and Disc
Player
No Picture or Sound from
External Video/Audio Products
Remote Control Doesn’t Work
Bars on Screen
Picture Distorted
Picture Rolls Vertically
No Color
Poor Reception on Some
Channels
Weak Picture
Lines or Streaks in Picture
Ghosts in Picture
Picture Blurred
Sound OK, Picture Poor
Picture OK, Sound Poor
No Picture or Sound
Dark and Blank Picture
External Electrical Noise
Interfering with TV’s Operation
Color on Part of the Screen
Appears Distored
QUICK SERVICE
CHECK LIST
Note:
• When viewing in TEXT mode, if no TEXT broadcast is being received,
the screen may become dark and blank. Should this occur, set the
CLOSED CAPTION mode to “OFF”.
Calling for Service
For location of the nearest Sharp Authorized Servicer, or to obtain product literature accessories, supplies,
or customer assistance, please call 1-800-BE-SHARP.
(Dark and Blank Picture)
20F650[44-46].p65 9/12/04, 1:45 PM45