Filter
Top Products
17
3 Enter the 4-digit SECRET No. using the
REMOTE
KEYPAD
, then V-CHIP BLOCK will temporarily be
canceled. If the wrong SECRET No. is chosen, “INPUT
SECRET No.” will be displayed again. Input the correct
SECRET No. again in this case.
4 “V-CHIP TIMER mode” is displayed, then press
VOL (+)
or
(–)
to set TIMER.
5 Press
MENU
to exit.
L To change the V-CHIP setting while V-CHIP BLOCK is set or
change the SECRET No. (When you forget the SECRET No.)
1 Change to another unblocked channel. Repeat steps
1 to 4 of [1] MPAA RATING to access V-CHIP select
mode. The “INPUT SECRET No.” will be displayed
again.
2 Press and hold both
VOL (+)
and
CH DOWN
(
9
) on
the TV set simultaneously until the message “INPUT
SECRET No.” disappears. The V-CHIP select mode
will be displayed and its settings or secret number can
be changed.
• As for the secret number, it will remain the same as shown
on the screen until you input another 4-digit pin number.
• If you turn the POWER OFF then ON again, the V-CHIP
function will be turned ON again.
[3]-A. Additional mode
There will be an additional new rating system. In that case,
please setup as follows. Subsequently the new rating system
will setup automatically.
1 Repeat steps 1 to 4 of [1] MPAA RATING to access V-
CHIP select mode.
2 Press
CH UP
(
8
) or
DOWN
(
9
) to move the
“ : ”
mark
to “OPTION”, then press
VOL (+)
or
(–)
.
Parent Control (V-CHIP operation Continued)
[3] TURN ON V-CHIP BLOCK
1 Repeat steps 1 to 4 of (1) MPAA RATING to access V-
CHIP select mode.
2 Press
CH UP
(
8
) or
DOWN
(
9
) to select “SECRET
No.” Enter the 4-digit secret no. (Ex. 1 2 3 4) using the
REMOTE KEYPAD.
3 Press
CH UP
(
8
) or
DOWN
(
9
) to select “STATUS” .
Press
VOL (+)
or
(–)
to turn “ON” the V-CHIP function.
(V-CHIP function is not operating if “STATUS” is
“OFF”.)
4 Press
MENU
to exit.
L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK
has been activated.
1 “V-CHIP HAS BEEN ACTIVATED” will be displayed if
you watch the program with Program Rating data as
the same as you configured.
• “V-CHIP HAS BEEN ACTIVATED” will not be displayed
if STATUS is not configured to “ON”.
2 Press
MENU
, then “INPUT SECRET No.” will be
displayed.
1 2 3
4 5 6
7 8 9
0
100
MENU
FLASHBACK
VOL
—
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
VOLUME (+)/(–)
CHANNEL UP
(8)/DOWN (9)
MENU
REMOTE
KEYPAD
(V-CHIP SELECT mode)
12
— — — —
12
CH
CH
1 2 3
4 5 6
7 8 9
0
100
ENTER
VOL
—
VOL
+
CH
CH
VOL
—
VOL
+
NOTE:
1 2 3
4 5 6
7 8 9
0
100
ENTER
VOL
—
VOL
+
CH
CH
NOTE:
(V-CHIP SELECT mode)
VOL (+)
/
CHANNEL
DOWN
(
9
)
buttons
VOL +
MENU
CH