Filter
Top Products
21
2
VOL
+
VOL
—
1 2 3
4 5 6
7 8 9
0
100
MENU
FLASHBACK
VOL
—
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
AIR
CABLE STD
CABLE IRC CABLE HRC
CH
CH
VOL
—
VOL
+
VOL
—
VOL
+
CH
CH
VOL
—
VOL
+
CH
CH
Set Up (Continued)
2 Saving Broadcast TV channels to memory.
1 Repeat steps 1 to 3 of EZ SETUP.
2 Press
CH UP
(
8
) or
DOWN
(
9
) to move the “ : ”
mark to “CH SEARCH”.
3 Press
VOL (+)
or
(–)
to access CH SEARCH mode.
4 Press
VOL (+)
. The tuner will search through all
available channels in your area and add them into
the TV’s memory.
TO STOP SEARCH
Press
VOL (–)
. CH SEARCH will stop at the current
channel and will not add any higher channels.
5 Press
MENU
to exit.
• If you press
VOL (+)
again while in the CH SEARCH mode, auto-
program will start again, and the previously memorized channels
will be lost.
3 Adding weak or additional channels or erasing unwanted
channels from TV memory.
1 Repeat steps 1 to 3 of EZ SETUP.
2 Press
CH UP
(
8
) or
DOWN
(
9
) to move the “ : ”
mark to “CHANNEL MEMORY”.
(SET UP mode)
REMOTE
KEYPAD
VOLUME
(+)/(–)
CHANNEL UP
(8)/DOWN (9)
MENU
7 Once EZ SETUP is completed, the lowest channel number
memorized will be displayed. (Ex. 2CH)
L CHANNEL SETTING
If EZ SETUP does not memorize all the channels in your
region, follow the instructions below to manually memorize
the channel.
1 AIR/CABLE setting
1 Repeat steps 1 to 3 of EZ SETUP.
2 Press
CH UP
(
8
) or
DOWN
(
9
) to move the “ : ”
mark to “AIR/CABLE”.
3 Press
VOL (+)
or
(–)
to access AIR/CABLE select
mode.
4 Press
VOL (+)
or
(–)
to select your TV signal mode.
5 Press
MENU
to exit.
• Receivable channels of your TV set are:
AIR channels:
VHF: 2 through 13.
UHF: 14 through 69.
CABLE channels:
1 (HRC and IRC mode only)
2 through 125 (STD, HRC and IRC)
(SET UP mode)
(TV signal mode)
(AIR/CABLE SELECT mode)
(SET UP mode)
(CH SEARCH mode)
NOTE:
NOTE: