Sharp 32N-S500 CRT Television User Manual


 
25
Using the Video and Audio Input Jacks
Connecting video device equipped with video output terminal.
CONNECTIONS
AIR
or
CABLE
VIDEO 1
(IN 1)
Rear
VIDEO 2
(IN 2)
Front
VIDEO 3
(IN 3)
Rear
L
R
AUDIO
VIDEO
IN 1 IN 3
IN 1 IN 3
S-VIDEO
LINE
OUT
LINE IN
VIDEO L-AUDIO-R
IN 2
CAMCORDER
VIDEO EQUIPMENT
TV GAME
To AUDIO OUTPUT
To VIDEO OUTPUT
(Front connection
terminals of TV)
Signal
(Rear connection terminals of TV)
TO S-VIDEO OUTPUT
(When your video equipment has an S-VIDEO output terminal).
TO S-VIDEO OUTPUT
(When your video equipment
has an S-VIDEO output terminal).
Video Equipment
To AUDIO INPUT (L)
To AUDIO INPUT (R)
To VIDEO INPUT
To AUDIO INPUT (L)
To AUDIO INPUT (R)
To VIDEO INPUT
Signal
Signal
NOTE:
L Connecting video equipment for playback of video material.
When the television is connected to video equipment as shown below, the material being played back on the video equipment can be seen
on the television screen.
L To watch video material playback.
Press the Remotes
INPUT
to select the VIDEO INPUT mode to which the video equipment you want to playback is connected.
The external VIDEO INPUT mode will change as follows each time the
INPUT
is pressed.
INPUT mode can be selected by pressing either the
CH UP
(
8
) on the TV remote control when the TV is set to the highest channel stored
in memory, or by pressing the
CH DOWN
(
9
) when it is set to the lowest channel.
When connecting video or audio equipment to the television, be sure that the power is turned off in order to prevent damage to either the
television or the equipment being connected.
An S-VIDEO terminal has priority over its corresponding VIDEO terminal (IN 1 or IN 3). When you want to watch pictures from video
equipment connected to a VIDEO terminal, unplug equipment connected to the corresponding S-VIDEO terminal.
It is the intent of SHARP that this product be used in full compliance with the copyright law of the United States and that prior permission be
obtained from copyright owners whenever necessary.
For detailed information on the connection and use of auxiliary equipment, refer to the instruction manuals of the equipment being used.
The connection cords can be obtained from your local video store.