Filter
Top Products
50
SETTINGS
Before using the USB memory device
CAUTION:
• Do not remove the USB memory device or unplug
the AC cord while the operations for “USB Memory
Management” or “Software Update Settings (Manual
Update from USB memory device)” are being
performed.
• Do not use a USB extension cable when connecting
a USB memory device to the USB1 or USB2 terminal
on the player.
− Using a USB extension cable may prevent the
player from performing correctly.
NOTE:
• SHARP cannot guarantee that all brands’ USB
memory devices will operate with this player.
• Only USB memory devices formatted with FAT 32/16
are compatible.
When formatting a USB memory device using a PC,
perform the following settings.
Format File System: FAT32
Allocation Unit Size: Default Allocation Size
USB Memory Management
The following instructions explain how to delete data
such as the Virtual Package data and the BD-LIVE
data in a USB memory device.
When you insert or remove a USB memory device,
be sure to turn the main power off and make sure
that “Quick Start” is set to “No” (See page 43).
1 Insert the USB memory device into the USB
terminal on this player.
• When the wireless LAN adapter is not inserted
into the USB1 terminal on the rear of the player, it
is recommended that the USB memory device be
connected to the USB1 terminal.
NOTE
• A USB memory device can be used with either the
USB1 or USB2 terminal. When two USB memory
devices are connected to both terminals at the same
time, in certain situations the USB1 terminal may give
priority to Local Storage and “Erase” and “Format” are
not available for the USB memory device connected to
the USB2 terminal.
Rear
USB1 terminal
USB memory device
Front
USB memory
device
USB2 terminal
2 Press B to turn on the power.
3 Press a/b to select “Settings”, then press d or
ENTER.
4 Press a/b to select “USB Memory
Management”, then press d or ENTER.
• The “USB Memory Management” screen is
displayed.
• “No USB Memory” appears when no USB memory
is inserted.
5 Press a/b to select “Erase” or “Format”, then
press ENTER.
Erase: Deletes only BD-VIDEO data written on the
USB memory device such as BD-LIVE data.
Format: Be aware that all data including BD-VIDEO
data and software update data will be deleted.
• If you want to delete only the unneeded software
update data after the software is updated, delete
the data on the USB memory device using a PC.
Erases BD-VIDEO data on USB memory.
Erase all contents on USB memory
including protected contents.
Format
Erase
6 Press a/b to select “Yes”, then press ENTER.
• A confirmation message is displayed. Check that
the correct USB memory device is displayed, and
then continue.
7 Start the process.
• The screen for the current operation will display.
OK
Complete
8 Press ENTER.
9 Press HOME or EXIT to exit.
NOTE
• Data which has been saved to the player’s internal
memory (game score, etc.) will also be deleted.