Sharp DV-NC70W DVD VCR Combo User Manual


 
53
GB
Fast Forwarding and Rewinding
1 Press ËSTOP to stop the video tape.
2 Press FF
è
or
È
REW.
3 Press ËSTOP to stop fast forward/rewind.
If you use other than E-90/E-180 cassettes, fast forward and rewind
may take somewhat longer.
Slow Motion Playback (with the Remote)
1 Press SLOW on the Remote during playback.
2 Press SLOW
/
(to the left of SLOW) to vary the slow
motion playback speed between 1/5 and 1/30 of the normal
playback speed.
3 Press ûPLAY to resume normal playback.
No noise can be erased when a tape recorded in the NTSC SP mode
is played back in special modes (still, slow motion, etc.). However, this
does not indicate a malfunction with the Product.
During slow motion, still picture, frame advance and double speed
playback with a tape recorded in the PAL EP mode, noise may appear.
Still Picture and Frame Advance
1 Press âPAUSE/STILL during playback. This will freeze the
picture on your TV.
2 If noise bars appear on the screen during still picture, set your
Product to the slow mode and press CH ' / " to make the
noise disappear. Then press âPAUSE/STILL again.
3 If there is vertical jitter during still picture playback, press
CH ' / " to stop jitter.
4 Press âPAUSE/STILL during still mode for frame advance.
5 Press ûPLAY again to resume normal playback.
Double Speed Playback
1 Press ûPLAY during playback. The tape will be played back at
twice the normal speed.
2 Press ûPLAY to resume normal playback.
Playback
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
ANGLE
PROG
DV- NC70
DV- NC70X
G-CODE
DV- NC70W
PLAY/×2
AV 2 IN
VIDEO
L
(
MONO
)
-
AUDIO
-
R
REC
CH
VCR/DVD
SELECTOR
/
OPERATE
EJECT/STOP
REW
TIMER
VCR
DVD
PLAY STOP
OPEN/CLOSE
PLAY/ 2
CH /
REW
EJECT /
STOP
Sound is muted during video search, slow motion, still picture, frame advance and double speed playback.
To avoid damage to the tape, your Product will resume normal playback after about 5 minutes of slow motion playback
and still picture.
If an NTSC tape and a PAL or MESECAM tape recorded in LP mode is played back in still picture, frame advance,
slow motion, Double speed, or Video Search mode, the picture may have horizontal jitter and the top of the picture will
be distorted, but this does not indicate VCR malfunction.