Filter
Top Products
E-45
SD-AT50(U)E5.fm02/7/19
SD-AT50
ENGLISH
DX-AT50
Advanced Features
- Timer and sleep operation -
Timer and sleep operation (continued)
"
Setting the sleep timer
You can set the system to the power stand-by mode at the specified time.
Caution:
This system cannot set the sleep timer of other equipment.
When setting the sleep timer using the digital tuner, TV, or VCR, the connected
equipment should be set to sleep timer at the same time.
To confirm the remaining sleep time:
! The remaining sleep time is displayed for about 10 seconds.
! You can change the remaining sleep time while it is displayed by pressing the
ENTER button (steps 3 - 4).
To cancel the sleep operation:
Sleep operation is canceled by turning the power on while "SLEEP" is indicated. The
same operation can be performed in the following procedure without turning the
power on.
"
To use timer and sleep operation together
You can fall asleep and wake up to the same CD.
1 While the disc is playing, press the TIMER but-
ton.
2 Within 10 seconds, press the or button to
select "SLEEP SET", and press the ENTER
button.
3
Press the or button to select set the time.
(Maximum: 2 hours - Minimum: 1 minute)
! 2 hours - 5 minutes 5-minute intervals
! 5 minutes - 1 minute 1-minute intervals
4
Press the ENTER button.
The sleep timer indicator lights up and playback begins.
5 Your system will enter the power stand-by mode automatically af-
ter the preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes.
You cannot change the volume.
1 While "SLEEP" is indicated, press the TIMER button.
2 Within 10 seconds, press the or button to select "SLEEP".
1 Press the TIMER button.
2 Within 10 seconds, press the or button to select "SLEEP OFF", and press the
ENTER button.
1 Set the sleep timer (steps 1 - 4).
Sleep operation starts.
2 Set the timer playback.
(Setting the timer on page 43, steps 1 - 7)
Remaining sleep time
Sleep timer setting Timer playback setting Timer playback start
Finish timeSleep operation will
automatically stop
Desired time1minute - 2hours
1 minute - 2 hours