Filter
Top Products
Setting the TV on the Wall
44
Appendix
Wall mounting the TV:
1 Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to
the TV.
2 Remove the 4 screws from the mount holes.
3 Purchase a VESA compatible wall bracket (please refer to the table above): VESA 400 x 400, 4 holes, M6,
20mm (LB-T462U), VESA 400 x 400, 4 holes, M6, 25mm (LB-T422U).
4 Locate the ideal TV position on the wall.
5 Fix the wall bracket firmly on the wall.
6 Secure the TV to the bracket using the 4 mount screws attached to the mount holes on the back and center of
the TV.
• Please read the instructions of your wall bracket to properly wall mount the TV.
• The pitch of the mounting holes is 400mm horizontally and 400mm vertically.
• The screws type required is metric: M6, 20mm (LB-T462U), M6, 25mm (LB-T422U).
CAUTION
• Installing the TV requires special skill that should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for
improper mounting or mounting that results in accident or injury.
Angular mounting
Vertical mounting