Filter
Top Products
10
● Press (MAIN POWER).
• The POWER indicator instantly changes from red to green and
the LCD TV set is turned on.
• The on-screen display appears for a few seconds after turning
on the main power.
On-screen display
1
● To turn off the main power, press (MAIN POWER)
again.
STANDBY/ON
To turn off the LCD TV
Press POWER of the remote control.
• The POWER indicator will turn red.
To turn the LCD TV back on
Press POWER of the remote control again.
• The POWER indicator will turn green.
Turning On and Off the Main Power
POWER indicator
(MAIN POWER)
Basic Operation
Switching the Input Mode (INPUT1/INPUT2/TV)
Turn on the power of the connected device.
Press TV/VIDEO (
)/( ) to select the applicable
input source.
• The screen changes in order of INPUT1, INPUT2 and TV
mode each time TV/VIDEO ( )/( ) is pressed.
NOTE
• INPUT1: Select this mode when viewing the signals from the video
equipment connected to the INPUT1 (COMPONENT)
terminals.
• INPUT2: Select this mode when viewing the signals from the video
equipment connected to the INPUT2 terminals using the
VIDEO or S-VIDEO terminal for video input.
If both terminals are connected with cables, the S-VIDEO
input terminal is selected as the high priority.
INPUT2
INPUT1
INPUT1 mode
INPUT2 mode
TV mode
1
1
2
LC15_20SH1M_X_E_P10-15.p65 04.12.22, 2:39 PM10