Filter
Top Products
20
To let you enjoy A2 stereo broadcasting, this LCD TV set
receives A2 stereo system and bilingual broadcasts.
Stereo
The LCD TV set is receiving a stereo broadcast.
•Each time you press MPX, the mode changes between
“STEREO” and “MONO”.
•When “MONO” is selected, the TV sound is output monaurally.
STEREO
MONO
Bilingual
The LCD TV set is receiving a bilingual broadcast.
•Each time you press MPX, the mode changes as follows:
MAIN
MAIN+SUB
SUB
NOTE
• If approximately 3 seconds pass without a button being pressed,
the mode setting is automatically terminated and the LCD TV set
returns to the normal mode.
• The setting can be selected individually for each channel number.
If the sound quality is poor due to a weak signal or other
problems during A2 stereo broadcast reception, set the
“OFF” position of the A2 to change the TV sound to monaural.
Press MENU to display the Menu screen.
Press \/| to select “SETUP”.
Press '/" to select “CH SETUP”, and press OK.
Press '/" to select “MANUAL”, and press OK.
Press '/" to select “A2”, and press \/| to select
“OFF”.
POSITION 1
FINE 871.1 MHZ
COLOUR SYSTEM AUTO
SOUND SYSTEM B/G
SKIP OFF
NICAM OFF
A2 OFF
0
• When the A2 sound is set to the “OFF” position, the
TV sound is output in monaural.
Press MENU to exit.
(When the “OFF” position is selected)
15
NOTE
• When the A2 sound is set to the “OFF” position, MPX cannot be
used to change the audio mode between stereo and bilingual
setting.
A2 Stereo Broadcast Selection
5
2
1
3
4
6
LC15_20SH1M_X_E_P18-20.p65 04.12.22, 2:40 PM20