Sharp LC-20SH1M Flat Panel Television User Manual


 
25
Problem Check item
Reception other than that of broadcasting stations could be the
problem.
Make sure the input mode is set to TV.
Make sure the main power switch of the LCD TV set is on.
Make sure the Picture adjustment is properly adjusted.
•The fluorescent lamp may have reached the end of its service
life.
Make sure the S-VIDEO terminal has nothing connected.
Make sure the volume is not set to minimum.
Make sure the sound is not set to mute.
Make sure the antenna cable is properly connected.
Bad reception could be the problem.
Make sure the antenna cable is properly connected.
Bad reception could be the problem.
Check the colour adjustment.
Check if “BACKLIGHT” is set to “DARK”.
•Check “CONTRAST”.
•The fluorescent lamp may have reached the end of its service
life.
Check if batteries in the remote control have sufficient power.
Make sure the remote sensor window is not under strong
lighting.
External influences such as lightning, static electricity, etc., may
cause improper operation. In this case, operate the unit after
turning the power off, or unplugging the AC cord and re-plugging
it in 1 or 2 minutes.
When a problem has occurred such as no picture or no sound, either turn off the main power and then turn it back on again, or
unplug the AC cord and then plug it in again.
Reference
page
Picture
There is no
picture or sound.
There is no
picture.
There is no
picture from
INPUT2 .
There is no
sound.
The picture is
not clear.
The picture is
too light or
improperly
tinted.
The picture is
too dark.
Remote control does not work.
There is no
picture or sound,
just noise.
Sound
Picture
Cautions regarding use in high and low temperature environments
When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
(Storage temperature: –20°C to +60°C)
Before calling for repair services, make the following checks for possible remedies to the symptoms encountered.
LCD TV set
10
10
15
8, 24
11
11
5
5
15
17
15
4
4
Troubleshooting
Unit cannot be operated.
LC15_20SH1M_X_E_P25-28.p65 05.3.14, 4:04 PM25