Filter
Top Products
7
MAIN POWER
MENU
TV/VIDEO
CH
( )
/
( )
VOL
( )
/
( )
Upper control panel
Part Names of Main Unit
Controls
NOTE
• TV/VIDEO, CH ( )/( ), VOL (–)/(+) and MENU on the main unit have the same functions as the same buttons on the remote control.
Fundamentally, this operation manual provides a description based on operation using the remote control.
OPC indicator (Optical Picture Control)
The Optical Picture Control indicator lights up green when the
“BACKLIGHT” is set to “AUTO (OPC)”. (See page 21.)
Remote sensor
OPC sensor
WAKE-UP TIMER indicator
The WAKE-UP TIMER indicator lights up red when the wake-up
timer is set.
POWER indicator
The POWER indicator lights up green when the power is on, and
red when in the standby mode (the indicator will not light when the
main power is off).
To change the vertical angle of the LCD TV
set, tilt the screen up to 5 degrees forward or
10 degrees backward. The LCD TV set can
also be rotated up to 25 degrees to right and
left. Please adjust the angle so that the LCD
TV set can be watched most comfortably.
How to adjust the angle
Tilt the display by grabbing onto
the carrying handle while securely
holding down the stand with your
other hand.
Speaker
(Headphone jack)
Plug the headphone mini-plug into the headphone jack
located on the side of the LCD TV set. (See page 6.)
LC-22GA3MX_E_P01-09.p65 2004.9.9, 5:48 PM7