Sharp LC-24LE220E Flat Panel Television User Manual


 
2. All the fi nished recordings are available on the
USB REC Recorded List” in the TIME menu, or
they are also accessible by pressing REC LIST key
on the remote control.
3. The TV set can start a timer recording while is in
standby mode. When the recording starts in this
mode, the status indicator (AQUOS pyramid) will
change from red to violet.
NOTES:
If you try to switch off the TV (B) during a USB recording,
an on screen menu will appear where you can decide to
switch off completely or continue with the recording until
the maximum capacity of the USB device is reached. If
you choose to continue with the recording, the TV will
switch off, but continue to show the pyramide icon lit in
purple.
4. The timer recordings are not possible when the TV
set is off, this is when the status indicator (AQUOS
pyramid) is not lit.
Useful viewing functions
Deleting recordings
To delete non desired recordings stored in USB device,
follow the instructions below:
1. Press REC LIST on the remote control.
2. Select the recording you want delete.
3. Press RED button on the remote control.
The deletion process is irreversible and causes
permanent loss of the recording.
NOTES:
The USB REC recording function does not work for ATV
channels or external inputs.
It can appear displaying troubles during rewind or
fast forward modes, depending on the USB memory
characteristics.
The recorded data will be never available for any external
device (computer) or in other TV even if it is the same
model. The recordings only can be displayed in the same
TV in which they were made.
Programmes wich require a PIN to watch them cannot be
recorded until you enter the PIN.
While TimeShift is activated, USB REC will be
disconnected. It is recommended to enable immediate
recording (REC) instead of TimeShift
/
, if you are
not sure when you are going to watch the recorded
programme.
Remember: with TimeShift function all the data will
be lost when switch-off the TV set.
Abbreviation list
Abbreviated term Stands for
ATV
Analogue TV
CEC
Consumer Electronics Control
DNR
Digital Noise Reduction
DTV
Digital TV
CADTV
Cable Digital TV
DVB-T
Digital Video Broadcasting-Terrestrial
DVB-C
Digital Video Broadcasting-Cable
DVI
Digital Visual Interface
EPG
Electronic Pogramme Guide
HDCP
High-bandwidth Digital Content Protection
HDMI
High-Definition Multimedia Interface
MHEG
Multimedia and Hypermedia Expert Group
OSD
On Screen Display
PCM
Pulse Code Modulation
USB
Universal Serial Bus
WSS
Wide Screen Signalling
28