Filter
Top Products
36
Basic adjustment settings
No Signal Off
When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.
Press a/b to select “No Signal Off”, and
then press ENTER.
Press c/d to select “Enable”, and then
press ENTER.
3
4
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
• When a TV programme finishes, and the AVC System
receives signal input, this function may not operate.
Press c/d to select “Power Control”.
• Power Control menu displays.
2
Press MENU and the TV MENU screen
displays.
1
TV MENU
Power Control
No Signal Off
DisableEnable
No Operation Off
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.
Press a/b to select “No Operation Off”, and
then press ENTER.
Press c/d to select “Enable”, and then
press ENTER.
3
4
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
Press c/d to select “Power Control”.
• Power Control menu displays.
2
Press MENU and the TV MENU screen
displays.
1
TV MENU
Power Control
No Operation Off
DisableEnable
TV MENU
Power Control Setup
No Signal Off
Power Save
No Operation Off [Disable]
[Disable]
[Standard]
TV MENU
Power Control Setup
No Signal Off
Power Save
No Operation Off [Disable]
[Disable]
[Standard]