Filter
Top Products
37
Power Control for PC source
Power Control allows you to reduce display brightness
and save energy.
Press c/d to select “Power Control”.
• Power Control menu displays.
2
Power save
When set to “Save1”, “Save2”, or “Auto”, power
consumption is reduced by decreasing backlight
brightness.
Press MENU and the PC MENU screen
displays.
1
Press a/b to select “Power Save”, and then
press ENTER.
Press a/b to select the desired backlight
brightness, and then press ENTER.
3
4
PC MENU
Power Control Setup
Power Management
Power Save
[Off]
[Standard]
PC MENU
Power Control
Power Save
Standard
Save1
Save2
Auto
NOTE
• When setting to “Auto”, the OPC indicator lights up green,
senses the surrounding light and automatically adjusts the
backlight brightness. Make sure no object obstructs the
OPC sensor, which could affect its ability to sense
surrounding light.
• Power Save can be set differently for AV input mode and
PC input mode.
Basic adjustment settings
Power management
When set, the power will automatically shut down.
Press a/b to select “Power Management”,
and then press ENTER.
Press a/b to select “Mode1” or “Mode2”,
and then press ENTER.
Press c/d to select “Power Control”.
• Power Control menu displays.
Press MENU and the PC MENU screen
displays.
Description
The screen darkens slightly to conserve
power consumption.
The screen darkens more significantly to
conserve power consumption.
Backlight brightness adjusts according to
the ambient light of the room to conserve
power consumption.
Selected item
Save1
Save2
Auto
Description
• No power management
• Factory preset value.
• If no signal inputs for 8 minutes, the power
shuts down.
• Even if you start using the PC and the signal
inputs again, the System stays off.
• The System turns on again by pressing B
(STANDBY/ON) button on the Display or B
on the remote control unit. (See page 14.)
• If no signal inputs for 8 seconds, the power
shuts down.
• When you start using the PC and the signal
inputs again, the System turns on.
Selected item
Off
Mode1
Mode2
3
4
2
1
PC MENU
Power Control Setup
Power Management
Power Save
[Off]
[Standard]
PC MENU
Power Control
Power Management
Off
Mode1
Mode2