Filter
Top Products
14
Part names
Front view
CLEAR*
MAIN POWER button
INPUT 4 terminal (S-VIDEO)
INPUT 4 terminal (VIDEO)
PC INPUT terminal (AUDIO)
INPUT 4 terminals (AUDIO L/R)
PC INPUT terminal (ANALOG RGB)
AVC System
Rear view
INPUT 1 COMPONENT
video terminals (Y, PB, PR)
INPUT 3 COMPONENT
video terminals (Y, P
B, PR)
MONITOR OUTPUT terminal
(S-VIDEO)
DISPLAY OUTPUT 2 terminal
DISPLAY OUTPUT 1 terminal
AC INPUT terminal
RS-232C
terminal
MONITOR OUTPUT
terminal (VIDEO)
MONITOR OUTPUT terminals (AUDIO L/R)
Antenna (A) input terminal
Antenna (B)
input terminal
Antenna (A) output
terminal
DVI-DIGITAL
INPUT
terminal
INPUT 3 terminal (S-VIDEO)
INPUT 3 terminal (VIDEO)
INPUT 3 terminals (AUDIO L/R)
INPUT 1 terminal (S-VIDEO)
INPUT 1 terminal
(VIDEO)
INPUT 1 terminals
(AUDIO L/R)
INPUT 2 terminal (S-VIDEO)
INPUT 2 terminal (VIDEO)
INPUT 2 terminals
(AUDIO L/R)
How to open the door.
STANDBY/ON indicator
* If the AVC System is switched on but it does not appear to be operating correctly, it may need resetting. In this
case, press CLEAR, shown in the diagram, lightly with the end of a ballpoint pen or other pointed object.
This will reset the System as shown below.
• AV MODE resets to USER
• TV channel returns to initial channel setting (Air:2ch, Cable:1 or 2ch)
• Twin picture resets to normal
• Audio setting initializes
• SRS resets to off
• Image position initializes
NOTE
• Pressing CLEAR will not work if the System is in standby mode (indicator lights red).
• Pressing CLEAR will not delete channel preset or secret number. See page 60 for clearing the secret number when you
know it. See page 82 for initializing to the factory preset values when you forget your secret number.
Headphone
(When connecting headphones, the sound from the
speakers is muted.)
DC OUTPUT terminal
(Terminal for expanded functionality
in the near future.)