Sharp LC-30HV4U Flat Panel Television User Manual


 
46
Using external equipment
Removing the speakers
This unit has detachable type speakers.
You can detach the system speakers when using external amplifier/speakers.
Before detaching (or attaching) speakers, unplug the AC cord from the AC outlet.
Before attaching/detaching speakers
Before performing work make sure to turn off the System.
Before performing work spread cushioning over a flat surface to lay the Display on. This will prevent it from
being damaged.
CAUTION
The speaker terminals on the Display are only for the attached speakers. Do not connect any third party plug or speaker
to the terminal.
Insert the speaker plug completely into the terminal.
Do not handle or move the Display by the speakers.
NOTE
Perform the same steps for both left and right speakers.
To attach the speakers, perform the above steps in reverse order.
123
Unfasten the screws used to
secure the speakers in place.
Take hold of the speaker and
slowly slide it sideways.
(The speaker plug is still
inserted, so make sure not to
pull the speaker too far.)
Remove the speaker plug from
the terminal on the Display.
(Do not remove the plug by
pulling the cord.)
Now the speaker can be
detached from the Display.
Speaker
plug