Sharp LC-42SH330E CRT Television User Manual


  Open as PDF
of 34
 
TV menu
E Automatically switch the TV to standby
(Sleep timer)
SleeptimerswitchestheTVtostandbyafteradefined
periodoftime.
1� Press MENU on the remote control and select
Features ≥ Time.
2� Press OK or ≥ to enter Time.
3� Press <> to select Sleep Timer�
4� Press ≤≥ to select the period of time before
TV enters to standby.
5� Follow the on-screen instructions to exit.
NOTE
• Whenyoupressanybuttonontheremotecontrolwith
lessthanthreeminutesleftinthecountdown,Sleep
timerwillbeautomaticallycanceled.
SCART
Youcansetthespecifictypeofsignalgoinginto
SCARTterminal.Checkthesignaloutputtypeofthe
DVDorotherequipmentconnectedtotheSCART
teminaloftheTV,referringtomanufacturer’sinstruction
ofthosedevices.Selectthecorrectinputsignalsetting
forSCART.
NOTE
• Thisoptionisavailableonlywhentheinputsourceis
SCART.
Use subtitles
YoucanenablesubtitlesforeachTVchannel.
SubtitlesarebroadcastedviateletextorDVB-Tdigital
broadcasts.Withdigitalbroadcasts,youhavethe
additionaloptionofselectingapreferredsubtitle
language.
E Set analogue subtitles
1� Press MENU on the remote control and select
Features > Subtitle�
2� Press OK or ≥ to enter Subtitle.
3� Select Analogue Subtitle.
4� Press ≤≥ to select On to display subtitle
always or On During Mute to display subtitles
only when audio is muted. Select Off to close
subtitles.
5� Follow the on-screen instructions to exit.
E Select a subtitle language on digital TV
channels
WhenyouselectasubtitlelanguageonadigitalTV
channelasdescribedbelow,thepreferredsubtitle
languagesetintheTVmenuistemporarilyoverruled.
1� Press MENU on the remote control and select
Features > Subtitle�
2� Press OK or ≥ to enter Subtitle.
3� Press <> to select 1st Subtitle or 2nd
Subtitle.
4� Highlight your selection and press ≤≥ to select
a subtitle language.
5� Follow the on-screen instructions to exit.
NOTE
• Ifyourselectedsubtitlelanguageisnotbroadcast,the
defaultlanguagesubtitlewillbedisplayed.
• Ifthe1st Subtitlelanguageyouselectedisnot
available,the2nd Subtitlelanguagewillbedisplayed.
E Select Hearing impaired subtitle
Whenwatchingchannelswithhearingimpairedservice,
youcanenablethesubtitlecommentaryforthehearing
handicapped.Fordigitalchannelsonly.
1� Press MENU on the remote control and select
Features ≥ Subtitle.
2� Press OK or ≥ to enter Subtitle.
3� Press <> to select Subtitle Type.
4� Press ≤≥ to select Hearing impaired as your
subtitle type.
5� Follow the on-screen instructions to exit.
Teletext language
YoucanselectTeletextLanguagewhentheTVreceives
TeletextsignalsbroadcastbyaTVnetwork.(Seepage
11.)
Common Interface
Thisfunctionenablesyoutowatchencryptedservices
(payservices).(Seepage25.)
NOTE
• Thisfunctionsmaynotworkdependinguponthe
countrybroadcastingcircumstances.
18
 previous next