Sharp LC-42SH330E CRT Television User Manual


  Open as PDF
of 34
 
Example of connectable devices
E VCRE DVDrecorder
E
When using the SCART 2
HalfSCART,whichtransmitsS-VideoorCVBSin,and
CVBSmonitorout.
32”
42”
NOTE
• Incaseswhenthedecoderneedstoreceiveasignal
fromtheTV,makesuretoselecttheappropriateinput
source.
• DonotconnectthedecodertotheSCART2.
• YoucannotconnecttheVCRwithDecoderusingafully
wiredSCARTcableundertheSCART2source.
Speaker / Amplifier connection
E
Connecting an amplifier with digital audio
input / analogue audio input
RL
AUDIO IN
26”
26”
32”
42”
32”
42”
Connecting external devices
Inserting the Smartcard into the CA module
Inordertoreceivecodeddigitalstations,aconditional
accessmodule(CAmodule)andaSmartcardmustbe
insertedintheCI(CommonInterface)slotoftheTV.
TheCAModuleandtheSmartcardarenotsupplied
accessories.Theyareusuallyavailablefromyour
dealer.
Inserting the Smartcard into the CA Module
1� Carefully insert the CA module in the CI slot
with the contact side forward.
2� The logo on the CA module must be facing
outward from the rear of the TV.
NOTE
• Ittakesabout30secondstocertifythelicensekey
whenyouinsertaSmartcardintotheCI+compatible
CAmoduleforthefirsttime.Thisprocessmayfailwhen
thereisnoantennainputoryouhaveneverrun“Auto
installation”.
• TheCI+compatibleCAmodulesometimesupgrades
itsfirmware.YoumaynotreceiveanyTVimagesbefore
upgrading.Youcanonlyusethepowerbuttonduring
upgrading.
• TheCI+compatibleCAmoduledoesnotallowyouto
outputanycopyprotectedprogrammesusingmonitor
out.
• IftheTVdisplaysanupdateconfirmationmessage
fortheSmartcardwhilereceivingCI+compatible
broadcasts,followthescreenprompts.
• MakesurethattheCAmoduleisproperlyinserted.
Checking CA module information
AfterinsertingandactivatingtheCAModule,make
suretheinputsourceisTV.
1� Press MENU on the remote control.
2� Go to Features > Common Interface.
NOTE
• Thismenuisonlyavailablefordigitalstations.
• Thecontentofthismenudependsontheproviderofthe
CAmodule.
Module
GeneralinformationonCAmoduledisplays.
Menu
AdjustmentparametersofeachSmartcarddisplays.
Enquiry
Youcaninputnumericalvaluessuchaspasswordshere.
SCARTcable
VCD / DVD
recorder
Speaker / Amplifier
connection
Digitalaudioin
(COAXIAL)
Digitalaudiocable
Audiocable
25
 previous next