Filter
Top Products
43
Watching TV
ATV (Analogue)/DTV/RADIO buttons
Use the following buttons on the remote control to
operate the menu.
ATV: Press to switch to ATV (Analogue TV) mode.
After switching from DTV, radio or external input mode
to analogue mode, the TV jumps to the most recently
viewed analogue channel.
DTV: Press to switch to DTV (Digital TV) mode. After
switching from analogue, radio or external input mode
to DTV mode, the TV jumps to the most recently
viewed DTV channel.
RADIO: Press to switch to radio mode. After switching
from DTV to radio mode, the TV jumps to the most
recently tuned radio channel. (DTV mode only)
When you watch the TV for the fi rst time
When the TV powers on for the fi rst time after
purchase, perform the auto installation.
ATV (Analogue TV)
You can run the auto installation to set channels
automatically.
1
To watch the analogue TV, select “Auto
Installation” from Setup menu. (See page 22.)
2
After setting the channels, you can select
a channel using CH
r
/
s
or 0 – 9 on the
remote control unit. (See page 23.)
DTV (Digital TV)
When the TV accesses to DTV (Digital TV) mode for the
fi rst time, you need to run the auto search. To scan all
available services in your area, follow the procedures
below.
1
To watch DTV broadcasts, select “Digital
Search” from auto installation menu. (See page
12.)
2
After setting the channels, you can select
a channel using CH
r
/
s
or 0 – 9 on the
remote control unit. (See page 23.)
LC46LB700X_EN.indb 43LC46LB700X_EN.indb 43 12/2/2009 8:49:44 AM12/2/2009 8:49:44 AM