Filter
Top Products
59
Connecting a PC
Selecting the input resolution
• Some input signals may have to be registered manually to
display properly.
• The pairs of input signals (resolutions) in the list below are
not distinguishable when received. In such case, you have
to set the correct signal manually. After setting once, it will
display when the same signal (resolution) is input again.
1024 x 768 1360 x 768
NOTE
• You can only select the “Input Signal” on the Setup menu
when receiving one of the 2 input signals listed above.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
1024 x 768
1360 x 768
Press a/b to select “Input Signal” and then
press ENTER.
3
Press a/b to select the desired input signal
on the display.
4
(Example)
Input resolution settings
65RX1X_en_i.indd 5965RX1X_en_i.indd 59 2008/06/20 14:03:142008/06/20 14:03:14