Sharp LC80LE650U Flat Panel Television User Manual


 
22
On-Screen Display Menu
Menu Operation Buttons
Using the remote control
Use the following buttons on the remote control to
operate the menu.
MENU:
Press to open or close the menu screen.
a
/
b
/
c
/
d
: Press to select a desired item on the
screen or adjust a selected item.
ENTER: Press to go to the next step or
complete the setting.
RETURN: Press to return to the previous step.
Using the control panel of the TV
You can also operate the menu with the control
panel of the TV.
Button operations on the control panel correspond
to the ones on the remote control as shown below.
MENU: MENU on the remote control.
INPUT: ENTER on the remote control.
CH
U
/
V
: Cursor
a
/
b
on the remote control.
VOL
k
/
l
: Cursor
c
/
d
on the remote control.
On-Screen Display Menu Operation
Menu
Information
Initial
Setup
System
Options
Picture
Settings
AV MODE (Changing Pic.Quality)
[STANDARD (ENERGY STAR)]
OPC
[On:Display]
Backlight
[ b5] a16 b16
Contrast
[b30] 0 b40
Brightness
[ 0] a30 b30
Color
[ b2] a30 b30
Tint
[ 0] a30 b30
Sharpness
[ b2] a10 b10
Advanced
Reset
Picture Settings
ENTER
: Select : Enter
MENU
: Exit
RETURN
: Back
Example
1
Press MENU to display the MENU screen.
2
1
Press
c
/
d
to select the desired menu.
2
Press
a
/
b
to select a specifi c adjustment item, and then press ENTER.
• Additional related adjustment items may be displayed. Press
a
/
b
to select the desired item.
3
Adjust the item while referring to the guide display.
• Operations vary depending on the function or item. Refer to the guide display corresponding to the menu
setting screen for button operations.
3
Press MENU to exit.
NOTE
• Menu options differ in the selected input modes, but the operating procedures are the same.
(ENERGY STAR:
Except for
LC-90LE657U)
LCFONT embedded
Menu
Information
Initial
Setup
System
Options
Picture
Settings
AV MODE (Changing Pic.Quality)
[STANDARD (ENERGY STAR)]
OPC
Backlight
[ b5] a16 b16
Contrast
[b30] 0 b40
Brightness
[0]a30 b30
Color
[ b2] a30 b30
Tint
[0]a30 b30
Sharpness
[ b2] a10 b10
Advanced
Reset
Picture Settings
ENTER
: Select : Enter
MENU
: Exit
RETURN
: Back
1
Guide display
• This indicates the buttons that can be operated on the displayed screen. The guide display varies depending on
the menu setting screen.
• The operations for some selected items may be displayed in the operational guide bar at the bottom of the
screen.
2
Item displayed in blue
• This indicates the item currently selected.
• Press ENTER to go to the adjustment screen for this item.
3
Item in brackets
• This indicates the current setting for the item.
4
Item displayed in white
• This indicates that the item can be selected.
5
Item displayed in gray
• This indicates that the item cannot be selected.
There are various reasons why the items cannot be selected, but the main reasons are as follows:
— Nothing is connected to the selected input terminal.
— The function is not compatible with the current input signal.
About Menu Items
• When AV MODE is set to "AUTO", part of the menu may not be displayed correctly or the setting range of the menu
may be changed.
• Some menu items may not be displayed depending on the selected input source.
NOTE
• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
• The order of explanations for each menu item in the following pages is not necessarily in accordance with the
alignment of the items on the screen.
LCFONT:
• This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly
displaying easy-to-read characters on LCD screens.