Sharp 26D42UW Flat Panel Television User Manual


 
21
Press MENU to display the Menu screen, and
then press
c
/
d
to select “Setup”.
DST Setting
1
Setting the Clock
Press
a
/
b
to select “Clock Setup”, and then
press
ENTER.
2
Press
a
/
b
to select “Time Adjustment”, and
press
ENTER.
3
Press
a
/
b
and
c
/
d
to set the time and
press
ENTER.
4
O Backup
The clock function is maintained for about 5 minutes
even when the AC cord has been shut off due to a
power outage or when moving the LCD TV set. (Since
about 30 minutes are required to charge the backup
power supply, it may not be possible to maintain the
clock function if the charging time is excessively short.) If
the clock setting has been reset, repeat the procedures
on this page.
Time Adjustment
Press MENU to display the Menu screen, and
then press
c/d to select “Setup”.
Press
a
/
b
to select “DST”, and then press
ENTER.
1
3
Press
c
/
d
to select “On” or “Off”.
4
Press MENU to exit.
5
• When “DST” is set to “On”, the time entered is forwarded
by 1 hour.
• Please be sure to set “DST” before setting “Time
Adjustment”.
Daylight Saving Time (DST) Adjustment
Daylight Saving Time (DST) Adjustment
The Daylight Saving-Time changes as shown below.
Set the DST to “On” to forward the clock by 1 hour.
To rewind the clock by 1 hour, set the DST to “Off”.
(Spring)
On the first Sunday in April DST starts.
(Autumn)
On the last Sunday in October DST finishes.
Press
a
/
b
to select “Clock Setup”, and then
press
ENTER.
2
Current time Adjustment
Setup
Option
Setup
Option