4
31
Power Control
Power control setting allows you to save energy.
No signal off
When set to “Enable”, the power will automatically shut
down if there is no signal for 15 minutes.
Audio Setup
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
• “Disable” is the factory preset value.
• When a TV program finishes, this function may not operate.
• “Disable” is the factory preset value.
Press
a
/
b
to select “PCM” or “Dolby Digital”,
and then press
ENTER.
No operation off
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.
Press
MENU to display the MENU screen, and
then press
c
/
d
to select “Power Control”.
Press
a
/
b
to select “No Operation Off”, and
then press
ENTER.
Press
c
/
d
to select “Enable”, and then press
ENTER.
• Five minutes before the power shuts down, the
remaining time displays every minute.
Digital Setup
This setting allows you to optimize the settings of
Digital broadcasting.
Press MENU to display the MENU screen, and
then press
c
/
d
to select “Digital Setup”.
Press
a
/
b
to select “Audio Setup”, and then
press
ENTER.
Basic adjustment settings
1
3
2
1
2
3
1
3
2
Press MENU to exit.
4
Press MENU to exit.
4
Press MENU to exit.
Press MENU to display the MENU screen, and
then press
c
/
d
to select “Power Control”.
Press
a
/
b
to select “No Signal Off”, and then
press
ENTER.
Press
c
/
d
to select “Enable”, and then press
ENTER.
• Five minutes before the power shuts down, the
remaining time displays every minute.
Selected item
PCM
Dolby Digital
Description
The optical output terminal outputs audio
signal in PCM form. If your digital audio
system does not support Dolby Digital,
select “PCM”.
The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces
sound from surround program of digital.