Filter
Top Products
Basic adjustment settings
Adjusts the picture to your preference with the
following picture settings.
Press MENU to display the MENU screen, and
then press _11/1_to select "Picture".
Press j,/Y to select a specific adjustment
item.
Press _11/1_to adjust the item to the desired
level.
Press MENU to exit.
,, For resetting all Picture adjustment items to the factory
preset values, press A/T to select "Reset", press ENTER,
press 4/1_ to select "Yes", and then press ENTER.
Automatically adjusts the brightness of the screen.
Press MENU to display the MENU screen, and
then press 41/_ to select "Picture".
Press A/Y to select "OPC".
Press 41/_ to select "On" or "On: Display".
Off The brightness is fixed at the value set in
"Backlight".
On Automatically adjusts
On: Display Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
Press MENU to exit.
,, When set to "On", the OPC senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure nothing obstructs the OPC sensor, which could affect
its ability to sense surrounding light.
,, When set to "On: Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
Backlight
Contrast
Brightness
Color
Tint
Sharpness
The screen dims
For less contrast
For less brightness
For less color
intensity
Skin tones become
purplish
For less sharpness
The screen
brightens
For more contrast
For more brightness
For more color
intensity
Skin tones become
greenish
For more sharpness
,, Select "Advanced" and then press ENTER to set "Color
Temp.", "Black", "I/P Setting", "Film Mode", "3D Y/C",
"Monochrome" or "Range of OPC'. See page 26.
Q- 25