Filter
Top Products
Using e×temal equipment
To view external source images, select the input
source from INPUT on the remote control unit or on
the TV.
INPUT FLASHBACK
@©
VOL CH
FREEZE MENU
0 Q
_ R_N
VOL + _ C_ A INPUT eOWER
Press INPUT.
" A list of selectable sources appears.
me INPUT1
If the image does not come in clearly from the external
equipment connected to INPUT 1, you may need
to change the input signal type setting on the '<Input
Select" menu.
Press MENU to display the MENU screen, and
then press _/_ to select "Option".
Press A/V to select "Input Select", and then
press ENTER.
Press A/Y to select the signal type you want
to set, and then press ENTER.
" if the selected signaltype is incorrect, imagesare
not displayed or displayedwithout any color.
Press MENU to exit.
o TIqesetting is stored and can be selected on the
"INPUT SOURCE" menu.
,, Refer to your external equipment operation manual for the
signal type.
,, if you set INPUT 1 to Auto, the TV will automatically select
the input signal.
,, Check the operation manual of the external equipment for
the signal type.
,, Setting INPUT 1 signal selection to "Auto" when other
equipment is connected will result in the following
connection priority.
INPUT 1:
COMPONENT VIDEO
VIDEO
Press INPUT again to select the input source.
,, An image from the selected source automatically
displays.
,, Each time INPUT is pressed, the input source
toggles.
,, You can also select the input source by pressing
A/_'.
,, if the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
,, See pages 13 and 14 for external equipment connection.
Q- 29