Sharp LC-52D64U Flat Panel Television User Manual


 
Audio Power Control
Treble
Bass
Balance
Surround
Bass Enhancer
Reset
[Off]
[On]
a15
L
b15
[ 0]
[ 0]
[ 0]
a15
b15
R
28
Sound adjustment
You can adjust the sound quality to your preference
with the following settings.
Basic adjustment settings
Press
c
/
d
to adjust the item to the desired
level.
NOTE
• Audio menu is grayed out when Output Select is set to
“Variable”.
• For resetting all Audio adjustment items to the factory
preset values, press
a
/
b
to select “Reset”, press ENTER,
press
c
/
d
to select “Yes”, and then press ENTER.
Press MENU to display the MENU screen, and
then press
c
/
d
to select “Audio”.
Press
a
/
b
to select a specifi c adjustment
item.
1
2
3
Press MENU to exit.
4
Selected item
Treble
Bass
Balance
c
button
For weaker treble
For weaker bass
Decrease audio from
the right speaker
d
button
For stronger treble
For stronger bass
Decrease audio
from the left
speaker
Film Mode (3:2 pull-down)
Automatically detects a fi lm-based source (originally
encoded at 24 frames/second), analyzes it then recreates
each still fi lm frame for high-defi nition picture quality.
Selected item
On
Off
Description
Detects, analyzes, converts fi lm source
Normal viewing mode
3D-Y/C
Provides high quality images with minimal dot crawl
and cross color noise.
NOTE
• 3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
Monochrome
For viewing a video in monochrome.
Selected item
Slow
Standard
Fast
Off (2D)
Description
For still images
Normal adjustment
For moving images
For Game Mode
Selected item
On
Off
Description
For viewing in monochrome
Normal color
NOTE
• “Film Mode” does not function when you set the “AV Mode”
to “Game”.
• “Film Mode” is not selectable when channel display shows
an input resolution of 480P, 720P, or 1080P.
Range of OPC
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of
e
16 and a minimum of
f
16.
NOTE
• The range of OPC settings are active only when the OPC is
set to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
Selected item
Max.
Min.
Description
f
15 through
e
16
f
16 through
e
15