Filter
Top Products
01/8/30 3.fm
19
MD-MT888H
Basic Operation
-Recording-
Notes:
z
Changing the volume level whilst recording does not
affect the recording.
z
You cannot adjust the bass level whilst recording.
z
After the group recording is performed, non-group
tracks will be moved behind the groups and track num-
bers will be changed.
1
Plug the remote control into the REMOTE
socket on the unit.
2
Hold down the REC button for 2 seconds or
more.
You can perform the same operation by simply press-
ing the REC button on the main unit.
3
To perform group record-
ing, hold down the
GROUP button for 1 sec-
ond or more so that
"GROUP" is lit.
z
The unit is ready to record a new group. (To select
a group, refer to page 21.)
z
When group recording is not performed, hold down
the GROUP button for 1 second or more so that
"GROUP" goes out.
z
Setting for the group recording will not be changed
until a new setting is entered.
4
Begin playback on the stereo system con-
nected to this portable MD.
5
Move the M button toward or to adjust
the recording level (page 20).
You can perform the same operation by holding down
the or button on the main unit.
6
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
Here you can search for the track to record.
7
Press the MODE button repeatedly to select
the recording mode (page 30).
You can perform the same operation by pressing the
MODE button on the main unit.
8
Move the M button toward .
You can perform the same operation by pressing the
button on the main unit.
9
Begin playback on the stereo system, the
output will be recorded.