Sharp MD-MT888H DVD Recorder User Manual


 
01/8/30 4.fm
39
MD-MT888H
Useful Features
-Checking Displays-
To check the elapsed time and remain-
ing time of the track
Whilst the playback or the playback is paused,
hold down the DISP button for 1 second or
more.
Each time the button is pressed, the display will change
as follows.
Notes:
z
If the disc name or the track name was not originally
recorded on the MiniDisc, "NoNAME" will be dis-
played.
z
Elapsed playback time and remaining playback time
may be different from the actual time.
Checking the remaining amount of bat-
tery level
The remaining amount of battery level is shown by the
battery indicator ( ) during operation.
z
When the battery is completely discharged, the bat-
tery indicator will flash. Recharge the battery or
replace the alkaline battery with a new one.
z
When the battery has run out completely, "LoBATT"
will appear. Then, the power will be disconnected
automatically.
Notes:
z
If you use the battery which you stopped charging
halfway, " " may appear. It does not mean that the
battery is completely charged.
z
The battery indicator will not correctly display the
remaining capacity for approximately 20 seconds after
the power has been turned on.
z
When the AC adaptor or a separately available car
adaptor is used, the battery indicator will not be
shown.
z
The number of bars shown in the battery indicator may
increase or decrease, depending on the operation
being performed. This is normal.
Track name Elapsed playback time
Remaining playback time