Filter
Top Products
48
Cleaning the Dust Filters
• The dust filters should be cleaned every 100
hours of use. Clean the filters more often when
the projector is used in a dusty or smoky
location.
Press SSTANDBY/ON on the pro-
jector to put the projector into
standby mode.
• Wait until the cooling fan stops.
• Disconnect the power cord and unplug
the power cord from the AC socket.
Remove the filter holders.
• Turn the projector over. To remove the fil-
ter holders, press in the tabs while lifting
up.
Clean the dust off the dust filters
and the holders with a hand
broom.
Info
1
2
3
Cleaning and Replacing the Dust Filters
AC socket
STANDBY/ON button
XR-11XCL_EN_l 06.9.1, 11:41 AM48