Sharp PG-MB66X CRT Television User Manual


 
64
Projector
PG-MB66X/PG-MB56X/XG-MB50X-L/XR-11XC-L/XR-10X-L/XR-10S-L
NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480I/DTV480P/
DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50
Single Chip Digital Micromirror Device
TM
(DMD
TM
) by Texas Instruments
Panel size:
[PG-MB66X/PG-MB56X/XG-MB50X-L/XR-11XC-L/XR-10X-L] 0.55" (14 mm), 1chip XGA DMD
[XR-10S-L] 0.55" (14 mm), 1chip SVGA DMD
No. of dots:
[PG-MB66X/PG-MB56X/XG-MB50X-L/XR-11XC-L/XR-10X-L] 786,432 dots (1,024 [H] × 768 [V])
[XR-10S-L] 480,000 dots (800 [H] × 600 [V])
[PG-MB66X] 1–1.15 × zoom lens, F2.4–2.6, f = 18.7–21.5 mm
[PG-MB56X/XG-MB50X-L/XR-11XC-L/XR-10X-L/XR-10S-L] 1–1.15 × zoom lens, F2.4–2.6, f = 19.0–21.9 mm
[PG-MB66X/PG-MB56X] 275 W DC lamp (AN-XR20L2)
[XG-MB50X-L/XR-11XC-L/XR-10X-L/XR-10S-L] 220 W DC lamp (AN-XR10L2)
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75 terminated
P
B: 0.7 Vp-p, 75 terminated
P
R: 0.7 Vp-p, 75 terminated
[PG-MB66X/PG-MB56X/XG-MB50X-L/XR-11XC-L/XR-10X-L] 600 TV lines (DTV720P)
[XR-10S-L] 520 TV lines (DTV720P)
15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 terminated
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75
terminated
45–85 Hz
15–70 kHz
12–108 MHz
9-pin mini DIN connector
ø3.5 mm minijack or RCA terminal: 0.5 Vrms, more than 22 k (stereo)
ø3.5 mm minijack: 0.5 Vrms, less than 2.2 k
4 cm × 2.85 cm oval × 1
AC 100–240 V
[PG-MB66X/PG-MB56X] 3.6 A
[XG-MB50X-L/XR-11XC-L/XR-10X-L/XR-10S-L] 3.0 A
50/60 Hz
PG-MB66X 350 W (“Bright” mode)/280 W (“Eco + Quiet” mode) with AC 100 V
PG-MB56X 330 W (“Bright” mode)/270 W (“Eco + Quiet” mode) with AC 240 V
XG-MB50X-L/XR-10X-L 298 W (“Bright” mode)/229 W (“Eco + Quiet” mode) with AC 100 V
XR-11XC-L/XR-10S-L 288 W (“Bright” mode)/223 W (“Eco + Quiet” mode) with AC 240 V
4.7 W (AC 100 V) – 6.1 W (AC 240 V)
PG-MB66X 1,315 BTU/hour (“Bright” mode)1,050 BTU/hour (“Eco + Quiet” mode) with AC 100 V
PG-MB56X 1,240 BTU/hour (“Bright” mode)/1,010 BTU/hour (“Eco + Quiet” mode) with AC 240 V
XG-MB50X-L/XR-10X-L 1,120 BTU/hour (“Bright” mode)/860 BTU/hour (“Eco + Quiet” mode) with AC 100 V
XR-11XC-L/XR-10S-L 1,080 BTU/hour (“Bright” mode)/840 BTU/hour (“Eco + Quiet” mode) with AC 240 V
41°F to 95°F (+5°C to +35°C)
–4°F to 140°F (–20°C to +60°C)
Plastic
38 kHz
12
13
/32" × 4
19
/64" × 11
1
/32" (315 (W) × 109 (H) × 280 (D) mm) (main body only)
12
13
/32" × 4
47
/64" × 11
37
/64" (315 (W) × 120 (H) × 294 (D) mm) (including adjust-
ment foot and projecting parts)
8.6 lbs. (3.9 kg)
Remote control, Power cord, RGB cable, 3 RCA to 15-pin D-sub cable, DIN-D-
sub RS-232C adaptor, Operation manual, Dust filter
Specifications
Product type
Model
Video system
Display method
DMD panel
Lens
Projection lamp
Component input signal
(INPUT1/2)
Horizontal resolution
Computer RGB input
(INPUT 1/2)/output
(OUTPUT) signal
S-video input signal
(INPUT 3)
Video input signal
(INPUT 4)
Vertical frequency
Horizontal frequency
Pixel clock
RS-232C terminal
Audio input signal
Audio output signal
(AUDIO OUTPUT 1-4)
Speaker system
Rated voltage
Input current
Rated frequency
Power consumption
Power consumption
(standby)
Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Replacement parts
As a part of policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance specifica-
tion figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
XR-11XCL_EN_m 06.9.11, 1:41 PM64