Filter
Top Products
11
(EZ SETUP mode)
EZ SETUP during First Power On
(Remote Control)
(On the Set)
L When you turn on the TV for the first time, it will automatically
memorize the broadcasting channels.
Please perform the following instructions before you press
the power button.
(1) Insert the batteries into the remote control. (See page 5)
(2) Connect the antenna cable to the TV set. (See page 6)
(3) Plug in the AC POWER cord to the wall outlet.
1 Press the
POWER
button on the TV set or on the Remote Control
to turn on the TV. The SELECT LANGUAGE mode will be
displayed.
2 Press
CH UP
(
8
) or
DOWN
(
9
) to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
3 Press
VOL (+)
or
(–)
to access EZ SETUP mode.
4 Press
VOL (+)
.
The tuner will automatically search for the
broadcasting and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once it
has started, press
VOL (–)
and it will be canceled.
If you want to SETUP again, please refer to page 26
on SETUP.
To cancel EZ SETUP
Press
VOL (–)
.
5 Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
NOTE:
• If EZ SETUP does not memorize all the channels in your region, please refer to page 28 for
more information on manually memorizing the channels using CHANNEL SETTING.
• It may be difficult to PRESET all channels in an area when the broadcasting signals are weak,
or multiple stations are received on the same channel. Please refer to pages 28 - 29 for more
information on manually memorizing additional channels using CHANNEL MEMORY.
(SELECT LANGUAGE mode)
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
VCR
MENU MUTE
CATV TV
FLASHBACK
A
DISPLAY
INPUT
B C D
ENTER
PERSONAL PREFERENCE
VOL
—
VOL
+
CH
CH
POWER
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/(–)
07-16/25N-M180 w/Imp. Safe 6/1/00, 10:04 AM11