Sharp 25N M180 CRT Television User Manual


 
32
Camcorder
TV Game
VCR
Using the Video and Audio Input Jacks
VIDEO EQUIPMENT
Connecting video device equipped with video output terminal.
CONNECTIONS
(Front connection
terminals of TV)
To VIDEO OUTPUT
L Connecting video equipment for playback of video material.
When the television is connected to video equipment as shown below, the material being played
back on the video equipment can be seen on the television screen.
To AUDIO OUTPUT
L To watch video material playback.
Press the Remotes
INPUT
to select VIDEO INPUT mode to which the video equipment you
want to playback is connected.
The external VIDEO INPUT mode will change as follows each time the
INPUT
is pressed.
INPUT mode can be selected by pressing either the
CH UP
(
8
) on the TV remote control when
the TV is set to the highest channel stored in memory, or by pressing the
CH DOWN
(
9
) when
it is set to the lowest channel.
NOTE:
When connecting video or audio equipment to the television, be sure that the power is turned
off in order to prevent damage to either the television or the equipment being connected.
It is the intent of SHARP that this product be used in full compliance with the copyright law of
the United States and that prior permission be obtained from copyright owners whenever
necessary.
For detailed information on the connection and use of auxiliary equipment, refer to the instruction
manuals of the equipment being used.
The connection cords can be obtained from your local video store.
AIR - INPUT
or (Front)
CABLE
27-32/25N-M180 w/Imp. Safe 6/1/00, 10:01 AM32