Filter
Top Products
Connection to an Audio System
Connections
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
Others Español
15
• When you change the connections, all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
or
OUTPUT
R
L
AUDIO
1
OUTPUT
R
L
AUDIO
2
Stereo system
COAXIAL
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
COAXIAL
AUDIO
Method 1
Analog audio
input jacks
Digital audio
input jack
AUDIO OUT
DIGITAL
AUDIO OUT
Method 2
Audio cable
(supplied)
Audio Coaxial
Digital cable
(commercially
available)
Note
• If output is Dolby Digital encoded audio, connect to a
Dolby Digital decoder and set “Dolby Digital” to
“Stream” for the “Digital Out” setting in the SETUP
menu. (Refer to pages 88-89.)
• If output is DTS encoded audio, connect to a DTS
decoder and set “DTS” to “ON” for the “Digital Out”
setting in the SETUP menu. (Refer to pages 88-89.)
• The audio source on a disc in a Dolby Digital 5.1 channel
surround format cannot be recorded as digital sound by
an MD or DAT deck.
• Unless connected to a Dolby Digital decoder or a DTS
decoder, set “Dolby Digital” to “PCM” and “DTS” to “OFF”
for the “Digital Out” setting in the SETUP menu. Playing a
DVD using incorrect settings may generate noise distor-
tion and may also damage the speakers. (Refer to pages
88-89.)
• Set “Dolby Digital” to “PCM” for the “Digital Out” set-
ting in the SETUP menu for connecting to an MD deck
or DAT deck. (Refer to pages 88-89.)
• By hooking this unit up to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Dolby Digital 5.1
channel surround sound as heard in the movie theaters.
• By hooking this unit up to the DTS decoder, you can
enjoy 5.1channel surround system which reproduces the
original sound as truthfully as possible. 5.1channel sur-
round system is developed by the Digital Theater System,
Inc.
Dolby Digital decoder, DTS decoder or
MD deck or DAT deck
DVD Recorder