Filter
Top Products
Press POWER, located on the upper side of the main
unit, to turn on the TV. The SELECT LANGUAGE mode
will be displayed.
Press '/" to select “ENGLISH”, “ESPAÑOL”
(Spanish) or “FRANÇAIS” (French).
ENGLISH
ESPAÑOL
FRANÇAIS
Press ENTER to access CH-SETTING mode.
Press '/" to select “ON” or “OFF”. When you select
“ON”, the LCD TV set will automatically memorize the
broadcasting channels.
ON
OFF
A
• If you select “OFF”, EZ SETUP will be canceled.
■When you turn on the TV for the first time, it will automati-
cally memorize the broadcasting channels.
Please perform the following instructions before you press
POWER.
(1) Insert the batteries into the remote control.
(2) Connect the antenna cable to the LCD TV set.
(3) Connect the AC cord to the POWER INPUT terminal of
the LCD TV set and plug in the AC cord to the wall
outlet.
EZ SETUP
EZ SETUP during the First Power On
1
Press ENTER to access START EZ SETUP mode.
Press '/" to select “YES”, and press ENTER.
A
• If you want to stop the EZ SETUP process once it has
started, press MENU and it will be canceled. If you want to
set up again, please see CH-SETTING.
YES
NO
CONNECT ANTENNA
OR CABLE.
The tuner will automatically search for the broadcasting
and cable TV channels. (The channel number will
automatically increase when it appears.)
PLEASE WAIT
PLEASE WAIT
AUTO PROGRAMMING
AUTO PROGRAMMING
Once EZ SETUP is completed, the lowest channel
number memorized will be displayed.
STEREO
SAP
MONO
2
A
• Do not let the EZ SETUP screen remain unattended for a long
time.
• If EZ SETUP does not memorize all the channels in your region,
please see CH-SETTING for more information on manually
memorizing the channels using CH-SETTING.
• It may be difficult to preset when the broadcasting signals are
weak, the channel cycle frequency is incorrect or the frequency
jamming is occurring around the area. Please see CH-SETTING
for more information on manually memorizing the channels using
CH-SETTING.
3
4
2
POWER
LC13_15_20SH4U_E_P11-18.p65 05.4.26, 5:56 PM11