Filter
Top Products
10
POWER
MENU
INPUT
CH
(
)
/
( )
VOL
(
)
/
(
)
Upper control panel
Speaker
OPC (Optical Picture
Control) sensor
Remote sensor
Headphone jack (
)
Plug the headphone mini-plug into the headphone jack located
on the front of the main unit.
OPC (Optical Picture Control) indicato
r
The OPC indicator lights up green when "OPC" is set to "ON".
(See page 20.)
POWER/WAKE UP TIMER indicator
POWER/WAKE UP TIMER indicator lights up green when the power is on,
and red when in the standby mode (the indicator will not light when the main
power is off), and orange when the wake up timer is set (the indicator will
light when in the standby mode).
Part Names of the Main Unit
Controls
A
• INPUT, CH (
)/( ), VOL (
–
)/(
+
) and MENU on the main unit have the same functions as the same buttons on the remote control.
Fundamentally, this operation manual provides a description based on operation using the remote control.
To change the vertical angle of the LCD TV
set, tilt the screen up to 2.5 degrees forward
or 10 degrees backward. Please adjust
the angle so that the LCD TV set can be
watched most comfortably.
Tilt the display by grabbing onto the
carrying handle while securely holding
down the stand with your other hand.
How to adjust the angle
Listening with Headphones
■
Plug the headphone mini-plug into the headphone jack located on the front of the main unit.
A
• Headphones are not included in the supplied accessories.
• No sound is heard from the main unit speakers when a headphone mini-plug is connected into the headphone jack.
• Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
▼
On-screen display
10
VOLUME
Headphones
Adjust the sound volume using VOL (
+
)/(
–
) on the
remote control.
LC-20S5U_E_P07-13.indd 10 2005/12/21 16:55:12