Filter
Top Products
Basic Operation (Continued)
17
Switching the Input Modes
(INPUT1/INPUT2/INPUT3/TV)
Turn on the power of the connected video equipment.
Press INPUT to select the applicable input source. The
screen changes in order of INPUT1, INPUT2, INPUT3
and TV mode each time INPUT is pressed.
INPUT3 mode
I N P U T3
TV mode
2
I N P U T2
I N P U T1
720P
INPUT2 mode
INPUT1 mode
A
• INPUT1:
Used for video equipment connected to the COMPONENT
input terminals.
• INPUT2:
Used for video equipment connected to the INPUT2
terminals.
The S-video input terminal is additionally provided for the
INPUT2 terminal. If both the S-video terminal and normal
video terminals are connected with cables, the S-video
input terminal takes priority.
• INPUT3/OUTPUT:
INPUT3 mode is used to adjust the preset settings and IN
or OUT can be selected. INPUT3 indication is not displayed
when OUT is selected. (For details on setting INPUT3
SELECT, see page 25.)
Sound Volume
■
To adjust the volume
●
Press VOL (
+
) to increase the sound volume.
The bar indicator shifts right.
VOLUME
��50
●
Press VOL (
–
) to decrease the sound volume.
The bar indicator shifts left.
10
VOLUME
■
To mute the sound
●
Press MUTE to temporarily turn off the sound.
The MUTE mark
is displayed for 4 seconds.
●
Press MUTE or VOL (
+
)/(
–
) to turn the sound back to
the previous level.
The mute function is automatically turned off when any
of the following buttons are pressed: POWER, MUTE,
VOL(
+
)/(
–
) or MTS.
10
VOLUME
A
• When VOL (
+
)/(
–
) is pressed in the Mute mode, the sound turns
on and the volume indicator is displayed.
• The Mute function is canceled when POWER is pressed.
■
To select MTS (Multichannel TV Sound)
Press MTS to display the MTS screen.
Press MTS to select the MTS settings.
STEREO: stereo audio
SAP: secondary audio program
MONO: monophonic audio
STEREO
SAP
MONO
<ON�AIR
<ON�AIR
A
• “ON AIR” appears when a STEREO or SAP broadcast is being
aired.
1
2
2
1
LC-20S5U_E_P14-19.indd 17 2005/12/21 16:56:27