Sharp LC 26D6U Flat Panel Television User Manual


 
22
Basic adjustment settings
Channel memory setting
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
1
2
3
4
Press a/b to select “CH Setup”, and then
press ENTER.
If you already set the Secret No., input the 4-
digit secret number here. See page 40 for
setting a secret number.
Press a/b to select ANALOG, DIGITAL (Air),
DIGITAL (Cable) and CableCARD, and then
press ENTER.
5
6
Press a/b to select “CH Memory”, and then
press ENTER.
Perform the following steps after confirming
the type of antenna connection made with
your TV, and the channel type selected in
Step 5.
When viewing ANALOG broadcasts:
1 Press a/b, and then press c/d to select
the channel to skip or not.
2 Press a/b to select “Skip”, and then press
c/d to select “On” or “Off”.
When viewing DIGITAL broadcasts:
1 Press a/b to select the channel to skip or
not, and then press c/d to select “On” or
“Off”.
On: Skips channels. (Channel selection disabled using
CH
rr
rr
r/
ss
ss
s.)
Off: Does not skip channels. (Channel selection enabled
using CH
rr
rr
r/
ss
ss
s.)
NOTE
Make sure what kind of connection is made with your TV.
Antenna Setup – DIGITAL
In order to receive digital air broadcasts, you need a
digital broadcast antenna. You can confirm the antenna
configuration through the “Antenna Setup - DIGITAL”
screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Antenna Setup -
DIGITAL”, and then press ENTER.
If you already set the Secret No., input the 4-
digit secret number here. See page 40 for
setting a secret number.
Press a/b to select “Signal Strength”.
The signal strength of the DIGITAL (Air) antenna
is displayed. The signal information is based
on the current channel.
Signal Strength
Press a/b to select “Channel Strength”, and
then press ENTER.
Input the 2-digit channel number to check
the signal strength of the selected channel.
Make sure the appropriate signal strength of
each channel received is obtained.
Channel Strength
The channel signal strength can also be checked
separately.
Repeat steps 1 to 3 in Signal Strength in
Antenna Setup - DIGITAL.
NOTE
This function is available for DIGITAL (Air) only.
1
2
4
Signal Strength
Channel Strength
Cable Reception
Signal Strength
Current Max00
2
3
1
Signal Strength
Current
CH
Max0
12
0
Signal Strength
Channel Strength
Cable Reception
3
LC-32D6U(E)-020-023 05.8.8, 10:16 AM22