Filter
Top Products
40
i.LINK Autoswitch
Input Select
Standby Mode
Recording Mode
Yes No
Model
Input
PWR
STOP
STOP
05
00:01:32
Press MENU to exit.
6
NOTE
• Input mode cannot be switched to i.LINK during recording.
• When a D-VHS deck connected to the TV is under timer
recording, the deck cannot be operated using the TV's
control panel.
• When an analog signal is being received on the TV, you
cannot use the i.LINK device to record.
Press
c
/
d
to select “Yes”, and then press
ENTER.
Press
a
/
b
to select “i.LINK Autoswitch”,
and then press ENTER.
Automatic input switching to i.LINK
Input mode can be set to automatically switch to i.LINK
when an i.LINK device connected to the TV is played.
Press MENU to display the MENU screen.
Press
a
/
b
to select “i.LINK Setup”, and
then press ENTER.
1
5
3
4
Press
c
/
d
to select “Digital Setup”.
2
Recording digital programs with a D-VHS
deck (i.LINK)
Before commencing this procedure, the steps in “i.LINK
Setup” on pages 34 and 35 need to be completed
beforehand.
Please also refer to the operation manual of the D-VHS
deck to be used with this TV.
Select a digital program to be recorded.
Press
a
/
b
/
c
/
d
to select “
E
”, and then
press ENTER.
• Recording starts.
• Select “
H
” and press ENTER to stop recording.
1
3
Press i.LINK to display the i.LINK control
panel.
2
Using external equipment