Filter
Top Products
69
Possible Solution
Troubleshooting-Digital broadcasting
The error message about reception of broadcast
• Failed to receive broadcast.
E203 • Check the broadcast time in the program guide.
Appendix
Caution sentence
• Record/Playback may fail on the
selected model.
• Wrong connection or no i.LINK
connection was found. Refer to
Operation Manual on connection.
• The selected model is disabled to
record/play. Check that no other
model is used.
• Displayed when you have selected a device that is not compatible with the TV, or
that does not have DTLA copy protection technology installed.
• Displayed when a problem is experienced with a connection using i.LINK cable.
Check the connection, and re-connect the cable if necessary.
• Displayed when the device you have selected is already being used by another
i.LINK connected device. To operate the selected device from the TV, you will fi rst
have to override control from the other device.
The example of an error
message displayed on a screen
• No broadcast now.
Error code
E202
Possible Solution
• Check the antenna cable. Check that the antenna is correctly
setup.
The cautions about i.LINK
PC compatibility chart
Apple and Macintosh are registered trademarks of Apple
Computer, Inc.
DDC is a registered trademark of Video Electronics
Standards Association.
Power Management is a registered trademark of Sun
Microsystems, Inc.
VGA and XGA are registered trademarks of International
Business Machines Co., Inc.
PC
31.5 kHz
31.5 kHz
37.9 kHz
37.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9kHz
48.4 kHz
56.5 kHz
60.0 kHz
47.7kHz
34.9 kHz
49.7 kHz
60.2 kHz
640 x 480
720 x 400
VGA
800 x 600SVGA
XGA 1024 x 768
WXGA 1360 x 768
VGA 640 x 480MAC13"
XGA 1024 x 768MAC19"
SVGA 832 x 624MAC16"
70 Hz
60 Hz
72 Hz
75Hz
56 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 Hz
67 Hz
75 Hz
75 Hz
O
O
O
O
O
O
O
O
O
O
O
PC/MAC
Horizontal Frequency
VESA StandardResolution
Vertical Frequency