Filter
Top Products
20
Basic adjustment settings
EZ Setup
You can run EZ Setup again, even after setting up the
preset channels.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
1
2
Press a/b to select “EZ Setup”, and then
press ENTER.
• If you already set the Secret No., go to step 4. If
not, skip to step 5.
Input the 4-digit secret number by using 0 – 9.
3
4
5
Press a/b to select the desired language
listed on the screen, and then press ENTER.
Antenna setting
Make sure what kind of connection is made with your TV when
selecting “Air” or “Cable” for ANALOG.
6
7
Press c/d to select “Air” or “Cable” for
ANALOG.
Press ENTER to enter the setting.
NOTE
• If no channel is found, make sure what kind of connection is
made with your TV and try EZ Setup again.
Press c/d to select “Yes” for ANALOG, then
press b to move down.
Press c/d to select “Yes” for DIGITAL (Air),
then press b to move down.
Select “Search Start”, and then press
ENTER.
• This operation makes the TV search for both
ANALOG and DIGITAL (Air) channels.
Language setting
Select from among 3 languages: English, French and
Spanish.
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
Channel Setup
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
1
2
3
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
Repeat steps 1 to 3 in Antenna setting in
Channel Setup.
1
2
3
Press c/d to select “Yes” for ANALOG, then
press b to move down.
Press c/d to select “Yes” for DIGITAL (Air),
then press b to move down.
Select “Search Start”, and then press
ENTER.
NOTE
• If no channel is found, make sure what kind of connection is
made with your TV and try channel search again.
Press a/b to select “CH Setup”, and then
press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 46 for
setting a secret number.
Antenna setting
Press c/d to select “Air” or “Cable” for
ANALOG.
Press ENTER to enter the setting.
Press a/b to select “Air/Cable”, and then
press ENTER.
Press a/b to select “CH Search”, and then
press ENTER.
4
5