Filter
Top Products
21
Basic adjustment settings
Channel memory setting
Repeat steps 1 to 3 in Antenna setting in
Channel Setup.
1
Perform the following steps after confirming
the type of antenna connection made with
your TV, and the channel type selected in
Step 3.
When viewing ANALOG broadcasts:
1 Press a/b, and then press c/d to select
the channel to skip or not.
2 Press a/b to select “Skip”, and then press
c/d to select “On” or “Off”.
When viewing DIGITAL broadcasts:
1 Press a/b to select the channel to skip or
not, and then press c/d to select “On” or
“Off”.
Press a/b to select ANALOG and DIGITAL
(Air), and then press ENTER.
Press a/b to select “CH Memory”, and then
press ENTER.
2
3
4
• On: Skips channels. (Channel selection disabled using
CH
rr
rr
r/
ss
ss
s.)
• Off: Does not skip channels. (Channel selection enabled
using CH
rr
rr
r/
ss
ss
s.)
NOTE
• Make sure what kind of connection is made with your TV.
Antenna Setup – DIGITAL – Air
In order to receive digital air broadcasts, you need a
digital broadcast antenna. You can confirm the antenna
configuration through the “Antenna Setup - DIGITAL”
screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
1
2
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Antenna Setup -
DIGITAL”, and then press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 46 for
setting a secret number.
4
3
Press a/b to select “Signal Strength”.
• The signal strength of the DIGITAL (Air) antenna
is displayed. The signal information is based
on the current channel.
Press a/b to select “Channel Strength”, and
then press ENTER.
Input the 2-digit channel number to check
the signal strength of the selected channel.
• Make sure the appropriate signal strength of
each channel received is obtained.
Signal Strength
Channel Strength
Signal Strength
Current Max00
Signal Strength
Current
CH
Max0
12
0
Signal Strength
Channel Strength
Signal Strength
Channel Strength
• The channel signal strength can also be checked
separately.
2
3
1
Repeat steps 1 to 3 in Signal Strength in
Antenna Setup - DIGITAL - Air.