Sharp LC 46D62U Flat Panel Television User Manual


 
32
Sleep Timer: Remaining
30
Off 30 60
120
90
NOTE
• Select “Off” by pressing SLEEP to cancel the sleep timer.
• The TV will enter the standby mode when the remaining
time reaches zero.
• When the sleep timer is set, its indicator on the TV lights
red.
Sleep Timer
Allows you to set a time when the TV automatically
switches to standby.
Press SLEEP.
• The remaining time displays when the sleep timer
has been set.
Each time you press SLEEP, the remaining
time switches as shown below.
• When set, the time automatically starts counting
down.
• If you want to adjust the sleep timer, you can
press SLEEP twice then change the time
setting.
• Five minutes before the time expires, the
remaining time displays every minute.
1
2
INPUT SOURCE
TV
DVD
INPUT2
INPUT3
INPUT4
INPUT5
Input Label
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display.
Useful adjustment settings
Press
a
/
b
/
c
/
d
to select the new name for
the input mode, and then press ENTER.
Example
NOTE
• You cannot change labels if the INPUT SOURCE is TV.
Press INPUT to select the desired input
source.
Press MENU to display the MENU screen,
and then press
c
/
d
to select “Setup”.
Press
a
/
b
to select “Input Label”, and then
press ENTER.
1
2
3
4
Press MENU to exit.
5