Filter
Top Products
E 15
Dimension: 176 x 250 mm
Printelligence (M) Sdn. Bhd
Channel setting
Enables individual channel setting.
MENU
PICTURE
SOUND
FEATURE
TIMER
CH-SETTING
1 Press
MENU
to call MENU
screen.
2 Press
CH
/
CH
to
select “CH-SETTING”.
CH-SETTING
POSITION CH27
AUTO
OFF
168.25MH
z
COLOUR
SKIP
ON
ON
NICAM
A2
FINE
CH
SELECT
ADJUST
MENU
RETURN
POWER
SAVE
TV/VIDEO
MPX
SURROUND
CH
CH
NORMAL
TV/TEXT
123
456
78
0
9
MENU
BACD
AV MODE
CH
CH
MENU
3 Press / to
display CH-SETTING menu.
4 Press
CH
/
CH
to
select desired setting.
5 Each time you press /
, setting for individual
items changes as follows:
• POSITION
The channel position changes to the higher or lower number.
• COLOUR
AUTO
PAL
• SKIP
ON OFF
Channel numbers with a “
” mark on the left are set to SKIP. To turn
off SKIP, press the number buttons to select the desired channel and
then set “SKIP” to “OFF”.
• FINE
The frequency changes to allow fine tuning.
• NICAM
ON (NICAM sound)
OFF (Monaural TV sound)
• A2 stereo system
The mode changes in the following order:
ON (A2 stereo sound)
OFF (Monaural TV sound)
• Switching COLOUR system:
Set the system to “AUTO” for normal TV reception. The AUTO mode automatically detects the receiving
signal system and changes the reception system of the TV set. When the picture is not stable, switching to
an appropriate system may improve the picture quality.
• In a weak reception area, or under bad reception conditions, you can change the frequency by fine tuning.
• When using FINE, the channel number changes from green to yellow.
• To return the channel to its original frequency setting, follow the manual channel tuning procedure. See
13
.
6 Press
MENU
until normal
screen appears.
• When you select AV1, AV2 or AV3
for the channel position, the CH-
SETTING menu changes as shown
on the right and the colour mode
changes in the following order:
CH-SETTING
POSITION AV1
AUTO
COLOUR
CH
SELECT
ADJUST
MENU
RETURN
AUTO PAL
N443
N358
Settings and adjustments
SX68NF8(11-15) 27/11/02, 11:17 AM15