Filter
Top Products
XL-DV75H_EN
11
2009September 15
Changing the setup menu (continued)
Setup
menu
Selectable parameters (* indicates default setting) Description
Audio ANALOG
AUDIO
DOWNMIX LT/RT
STEREO*
DIGITAL
AUDIO
DIGITAL
OUTPUT
SPDIF OFF
SPDIF/RAW*
SPDIF/PCM
Useful whilst using HDMI
cable. When playing a disc
recorded with Dolby Digital
or DTS, the corresponding
digital signals will be output
from the HDMI Output
socket.
● PCM : Choose this
setting if the HDMI TV
cannot support Dolby
Digital or DTS to avoid
noise or mute from the
TV.
● RAW : Choose this
setting if the HDMI TV
can support Dolby
Digital or DTS.
LPCM
OUTPUT
48K*
96K
Select the sampling
frequency at 48 kHz/16 bit
or 96 kHz/24 bit capability
after you select SPDIF/
PCM at SPDIF SETUP.
Dolby DUAL
MONO
STEREO*
L-MONO
R-MONO
MIX-MONO
DYNAMIC
(*1)
FULL Audio with fully
compressed dynamic
range.
3/4
1/2
1/4
Audio with partially
compressed dynamic
range.
OFF* Audio with uncompressed
dynamic range.
Video VIDEO
OUTPUT
(*2)
SVIDEO
COMPONENTS
SCART*
●SVIDEO : Choose
this setting
for
S-VIDEO
output.
●COMPONENTS:
Choose
this setting
for
COMPO-
NENT
output.
●SCART : Choose
this setting
for SCART
output.
RESOLU-
TION
480I
576I
720P (50Hz)*
1080I (50Hz)
1080P (50Hz)
720P (60Hz)
1080I (60Hz)
1080P (60Hz)
You can select HDMI
resolution whilst using
HDMI cable.
If you use TV without multi-
system (PAL or NTSC only)
whilst doing HDMI setup,
select any resolution with
50 Hz only for PAL system.
Whilst for TV with NTSC
system, select any
resolution with 60 Hz.
COLOR
SETTING
SHARP-
NESS
HIGH
MEDIUM*
LOW
BRIGHT-
NESS
-20 –> 0* –> +20
CONTRAST -16 –> 0* –> +16
ANALOG AUDI
O
DIGITA
L
AUD
IO
GO TO AUDIO SETUP PAGE
- - AUDIO SETUP PAGE - -
DOLBY VIDEO
PREFERENCE
GENERAL AUDIO
DUA
L
MO
N
O
DY
NA
M
I
C
GO TO DOLBY DIGITAL SETUP
- - DOLBY DIGITAL SETUP - -
VIDEO
PREFERENCE
GENERAL AUDIO DOLBY
VIDEO OUTPUT
Resolution
COLOR SETTING
DivX VOD
HDMI Setup
GO TO VIDEO SETUP PAGE
- - VIDEO SETUP PAGE - -
AUDIO DOLBY
OFF
GENERAL
PREFERENCE
VIDEO