Filter
Top Products
XL-DV75H_EN
16
2009September 15
8
7
6
5
4
3
2
1
DVD playback
Note:
During operate FM/AUX, OPEN/CLOSE CD tray will
change to DVD function.
To interrupt playback:
Press the / ( / ) button.
To resume playback from the same point, press the /
( / ) button.
To stop playback
DVD:
Press the ( ) button twice.
Audio CD/MP3/JPEG
Press the ( ) button.
When the unit is left unoperated for more than 5 minutes
after pressing the ( ) button, a screen saver appears
(see page 10 when the screen saver setting is “ON”).
Press any button on the main unit or remote control. The
startup screen returns.
Caution:
● Close the disc tray when not in use. Otherwise, dust
may accumulate inside and cause malfunction.
● The unit gets slightly warm when used for a long time.
It does not mean the unit is damaged.
● When attempting to play discs with scratches or of a
different region number, or unplayable or restricted (*1)
discs, an error message will appear on the TV display
and the disc will not play.
(*1) Viewing is prohibited on some DVDs according to the
audience age.
Notes:
● During disc initialisation, the volume cannot be adjusted.
● Stop positions may be recorded on some discs. When
you play such a disc, playback stops there.
● During an operation, “ ” may appear indicating that
the operation is disabled by the disc.
● The main unit detects loaded discs automatically and
then the indicators light up.
You can resume playback from the point playback is
stopped.
To cancel the resume playback:
Press the ( ) button twice.
Notes:
● The resume playback feature is disabled on some
discs.
● Depending on the disc, playback may resume from
slightly before the stopped position.
The following are examples of operation indicators that
appear during DVD playback.
■ Playback
1 Press the ON/STAND-BY button to turn the power on.
2 When the input is not set to the
disc mode, press the FUNCTION
button repeatedly to display the
startup screen.
The startup screen appears.
3 Press the ( ) button to open the disc tray.
4 Place the disc on the disc tray, label side up.
Be sure to place 8 cm (3") discs in the middle of the disc
position.
5 Press the ( ) button to close the disc tray.
Discs supporting auto start will start to play once you
close the disc tray even if you do not press the
/ ( / ) button.
6 If playback does not start in step 5, press the
/ ( / ) button.
/
ON /
ON /
STAND-BY
STAND-BY
DIRECT
DIRECT
ON /
ON /
STAND -BY
STAND-BY
OPEN / CLOSE
OPEN / CLOSE
TUNING
TUNING
EQUALIZER
EQUALIZER
VOLUME
VOLUME
MEMORY
MEMORY
TOP MENU
TOP MENU
AUDIO
AUDIO
ZOOM
ZOOM
ANGLE
ANGLE
STEP
STEP
SLOW
SLOW
ASPM / PTY
ASPM / PTY
RDS
RDS
DISP
DISP
A-B
A-B
SUB TITLE
SUB TITLE
/ DIGEST
/ DIGEST
MENU/PBC
MENU/PBC
RETURN
RETURN
X-BASS
X-BASS
MUTE
MUTE
OSD
OSD
FUNCTION
FUNCTION
TUNING
TUNING
SETUP
SETUP
ENTER
ENTER
1 2 3
4 5 6
7 8 9
0
10
10
PRESET
PRESET
RANDOM
RANDOM
PRESET
PRESET
■ To resume playback after stopping
(resume play)
1
Whilst a disc is playing, press the ( ) button.
The system stores the point you stopped.
2 To restart play, press the / ( / ) button.
Play resumes from the point you stopped.
■ DVD mode operation indicators
Operation TV screen Unit display
When the
power is on
without a disc.
Disc data is
being read.
Stop
Play
Pause
NO DISC
TITLE CHP
A-B
REPEAT1SLEEPPROGPRESETTRK
KHz
MHz
LOADING
A-B
REPEAT1SLEEPPROGCHPPRESETTRKTITLE
KHz
MHz