Filter
Top Products
CONNECTIONS
17
Connections
Connecting to your TV using Component video cables.
You will enjoy high quality and accurate color reproduction images. Component video separates the
picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images.
(Audio signals are delivered through the audio output.)
1
Using component video cables (not included), connect the COMPONENT VIDEO OUT terminals on
the rear of the Blu-ray Disc Player to the
COMPONENT IN terminals of your TV.
2
Using the included audio cables, connect the AUDIO (red and white) OUT terminals on the rear of
the Blu-ray Disc Player to the
AUDIO (red and white) IN terminals of your TV. Turn on the Blu-ray
Disc Player and TV.
3
Press the input selector on your TV remote control until the Component signal from the Blu-ray Disc
Player appears on the TV screen.
Connecting to a TV (Component cable)
Back of the player
Audio/Video cable
(included)
Television
Component cable
(not included)
NOTE
• Unplug the yellow plug of Audio/Video cable.
• Depending on the manufacturer, the component terminals on your TV may be marked ‘R-Y, B-Y, Y’ or ‘Cr, Cb, Y’
instead of ‘Pr, Pb, Y’. The number and position of terminals may vary depending on the TV set. Please refer to the
user's manual of your TV.
BDP-6003-English 2008.12.5 6:19 PM ˘ `17